Causes of obstruction in the production of ordinary woven bags

Ordinary woven bag manufacturers will be blocked during production. The angle of the hair dryer is unreasonable, which may produce a shielding plate. Therefore, the angle of the hair dryer needs to be adjusted. There may be a problem with the woven bag itself.

In this case, the ordinary woven bag should be replaced and the base paper, plastic or film and ink should be mixed on the printer to separate. There may be something wrong with the ink. Just exchange new ink. In fact, if there are problems in the production process, find out the causes in time and take corresponding measures, it can be solved as soon as possible. If the ink sticks together, increase the drying speed of the ink during production, and then reduce the printing speed, so as to wipe the bag print well.

With the increasing social demand, the use of ordinary woven bags is becoming more and more popular, but curling is a very difficult thing. Before segmentation, it must be ensured that the firm adhesion of ordinary woven bags does not occur when they just leave the hot extruder, but requires the effective hardening of adhesive and the mutual adaptation of BOPP film and paper stress, and the early segmentation after storage for more than 24 hours, so as to improve the shrinkage reaction of BOPP film and easy to wrinkle.

The moisture of the semi-finished products of paper plastic ordinary woven bags has just broken away from the blocking period. The residual temperature of the semi-finished products of paper plastic composite bags is high. The hotter paper plastic composite semi-finished products absorb external cold air and reduce the temperature while emitting heat. This cooling increases humidity. Placing semi-finished products directly on the ground is easy to absorb moisture and produce split curls.

The content of this article comes from the network. If you have any questions, please contact me to delete it!